Well Water Testing Tips in Texas
Do you know the quality of the water you are drinking from your private water well? Unlike a public water supply that is filtered, tested, treated and managed daily, the only person managing a private well is the well owner. Obviously, it’s important to know what you are drinking so testing your well water is the only way to find out the suitability of your water quality for its intended use, whether it’s for human consumption or livestock. Water quality can also change over time. So if you’re drinking water comes from a well here’s some things you may want to consider.
Do Your Know Whats in Your Well Water?
The only way to tell if your drinking water is safe is by having it tested at a certified laboratory. Harmful bacteria, parasites, and viruses are invisible to the naked eye, so water which looks and tastes good may not necessarily be safe to drink. These microbes can exist in surface and groundwater supplies, and can cause immediate sickness in humans and animals if not properly treated.
Certain chemical contaminants that are sometimes found in a water source can cause long term health problems that take years to develop. Regular water testing will identify unsafe water and ensure that the treatment system is treating the water to a satisfactory level.
What Should Your Well Water be Tested For?
Testing your well water quality on a regular basis is an important part of maintaining a safe and reliable water source. Water quality testing will help ensure that a water source is safe from potential contamination. Test results will help a well owner select appropriate water treatment, if any.
Basic testing typically looks for things in the water that can damage a homes infrastructure such as a homes plumbing system. This type of testing can be required by a lender and it looks for issues that can be damaging to the home itself. Basic tests may check for coliform bacteria, nitrates, pH, sodium, chloride, fluoride, sulphate, iron, manganese, total dissolved solids, and hardness.
Higher-level testing looks at things that are harmful to humans, such as arsenic levels or volatile organic compounds, which are organic chemicals that can make you sick if you ingest them. So a higher-level test may be appropriate if a particular contaminant is suspected in the water. For example, groundwater sources can be tested for arsenic, lead, selenium, and uranium. Both surface and groundwater sources may also be tested for pesticide contamination.
People tend to assume that any basic water test is a comprehensive test that will look for all issues, but that’s not usually the case. It’s your best bet to request higher level water testing when it involves your drinking or livestock water..
How Often to Test, the Cost, Treatment
Private well water should be tested a minimum of once per year. Shallow wells and water from surface sources should be tested more frequently. It is important to test your drinking water at the tap and at the source. Testing both will help you determine if your treatment system is performing correctly, and if the quality of your source water has changed.
If you hire a professional you can expect to pay around $275. If you collect the water samples yourself and send them to a lab it may be around $180. For additional testing for contaminates such as lead or perfluorocarbons your bill could be higher.
Companies specializing in the treatment of water quality can correct issues with well water. Even lead in water can usually be corrected as the source a lot of times comes from old lead pipes.
What About an Inspection of the Well Itself?
It’s important to inspection the well, pumps and equipment especially when purchase a property with an existing well. A well inspection normally will tell you if the well is working and in good condition, how much water the pump can deliver and at what pressure, and whether or not the well pumps off during a 30 minute pump test. A basic well inspection normally does not tell you how deep the well is, the water level or how much the well can produce. A well inspection should provide you with recommendations or improvements, if any, needed for your well system.
Here’s a related blog post: Who Owns Texas Groundwater and How Can it be Used